EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller is usually a very productive solar controller created for off-grid solar techniques. Determined by multiphase synchronous rectification technologies, it assures optimized Electricity conversion and process security for a variety of photovoltaic (PV) purposes.
Important Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller engineering for remarkable photo voltaic Electricity harvesting. Vital characteristics involve:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
State-of-the-art MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with true-time info checking.
Various Load Command Modes including handbook and timer.
In depth Digital Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Make sure all elements are integrated: Tracer AN unit, temperature sensor, communication cables, and person guide.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Choose a effectively-ventilated, dry place close to the battery lender.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Keep suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Normally comply with appropriate security protocols and ensure the procedure is driven off just before connecting components.
Step one: Link the battery terminals towards the demand controller (beneficial to constructive, damaging to unfavorable).
Step 2: Connect the photo voltaic panel array to your PV input terminals.
Step 3: Connect the load terminals if using a immediate load relationship.
Step 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power to the controller by connecting the battery first.
Make use of the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, light-weight Management.
5. Checking and Info Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Data is often logged through the RS485 communication port working with application like Photo voltaic Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Prevalent Problems
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Over-Voltage Defense
Verify the solar array’s voltage ranking.
Alter system parameters if necessary.
Difficulty three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology guarantees:
Better Efficiency: Diminished energy losses for the duration of visit here conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an exceptional choice for optimizing solar energy generation and lengthening battery existence. By next the above setup tutorial, users can make certain utmost efficiency and program longevity.